1x12 ABS PLC Splitter
OPTICO fiber optic splitters are available in a wide range of styles and sizes to split or combine light with minimal loss.
1x12 ABS PLC Splitter
There are currently two types of PLC splitters, 1×N and 2×N. The 1×N and 2×N splitters evenly divide the optical signal into multiple outlets from a single or dual inlet, or work in reverse to consolidate multiple optical signals into a single or dual fiber.
The 1x12 PLC Splitter is manufactured according to the special FTTX wiring requirements. With channel 1x12, it still transmits by evenly distributing the optical signal.
1x12 | |||
G657A or customized | |||
900um | 1260~1650nm | ||
<12.2dB | >55dB | ||
Less than or equal to 1.0dB | Greater than or equal to 55dB | ||
Less than or equal to 0.3dB | Less than or equal to 0.5dB | ||
18x80x120mm | -40 to 85 degree |
1 input fiber, 12 output fibers
Greater than or equal to 55dB high return loss, Less than or equal to 12.2dB low insertion loss
Single-mode and multi-mode both available
Response within 24 hours
100% 3D tested by Daisi or Sumix devices
100% high and low temperature cycle test
Can accept 168 hours of high temperature boiling experiment if necessary
2000000CH/Month of production capacity (very short lead time)
 |  |  |
Cim npe nrov: 1x12 abs plc splitter, China 1x12 abs plc splitter manufacturers, suppliers, factory
Koj Tseem Yuav Zoo Li
Xa kev nug
